With the factory settings, the pad sensitivity is set fairly high, so the pads might sometimes operate unexpectedly.
Perform the following procedure.
- Hold down the [SHIFT] button and press the [KNOB ASSIGN] button - the UTILITY MENU screen appears.
- Use the cursor [<] [>] buttons to select “SET,” and then press the [ENTER] button
- the SYSTEM SETTING screen appears. - Use the cursor [<] [>] buttons to select the “CTRL” tab.
- Use the cursor [v] [^] buttons to select “Pad Threshold,” and use the [VALUE] dial to decrease the value.