MC-707: When using samples on the drum track, the breaking up of the sound is sometimes occurs.

Setting the Assign Type to "Single" will reduce the number of voices used and make it less likely to cause a break up.

Perform the following procedure.

1. In the HOME screen, use the cursor buttons to select the drum track that you want to edit.
2. Hold down the [SHIFT] button and press the [SOUND] button.
   - The KIT EDIT screen appears.
3. Select a pad in which a sample is loaded, and press the [ENTER] button.
4. Use the cursor [<] [>] buttons to select “INST EDIT” and then press the [ENTER] button.
5. Select “Assign Type” in the <Common> tab.
6. Use the [C4] knob to select “Single.”