TR-8S TR-6S: Can I specify the Kit or Pattern that are selected at the start-up?

Yes.
Perform the following procedure.

1. Press the [UTILITY] button to make it light.
   - The setting screen appears.
2. Use the [VALUE] knob to select “Start Ptn” or “Start Kit,” and press the [ENTER] button (TR-6S: [VALUE] knob).
3. Use the VALUE knob to specify the pattern or kit to be loaded at startup.
4. Press the [WRITE] button.
5. Use the [VALUE] knob to select “System,” and press the [ENTER] button (TR-6S: [VALUE] knob).
   - Confirmation screen will appear.
6. Use the [VALUE] knob to select “OK,” and press the [ENTER] button (TR-6S: [VALUE] knob).