When using a condenser mic that requires phantom power with the VERSELAB MV-1, you need to turn the Phantom Power on.
- Be sure to set this to "OFF" when using a dynamic microphone.
- If the “Phantom Sw” does not appear, please update the system program to the latest version.
Perform the following procedure.
- Press the [INPUT] button, or hold down the [EDIT] button and press the MIC [ON] button.
- Use the [VALUE] dial to select “Phantom Sw,” and then press the [VALUE] dial.
- Use the [VALUE] dial to select “ON.”
- Press the [EXIT] button to return to the previous screen.