How to view the system version in your VERSELAB MV-1
When the power to the VERSELAB MV-1 is turned on, the title screen appears on the display. The current version is displayed at the bottom right of the title screen.
What you will need to update your VERSELAB MV-1
- VERSELAB MV-1
- A computer with a SD Card Slot ( Windows, Mac )
- SD Card formatted on the VERSELAB MV-1
Please refer to "VERSELAB MV-1: Formatting an SD Card" for instructions on formatting the SD card.
How to update the MV-1
Note: Please perform the update responsibly, following the directions and caution given on the VERSELAB MV-1 System Program download page.
- Click here and download "mv1_sys_vxxx.zip" file on your computer, then extract it.
Note: Replace "xxx" with the version number of the file. - Open the extracted folder and copy the MV1_UPA_up.bin file to the root directory of the SD card.
- Turn off the power of the MV-1, and insert the SD card into the SD card slot.
- While holding down the [SHIFT] button, turn on the MV-1.
- The update will then start. - When "COMPLETE" appears on the display, turn the power back on.
- Perform the Factory Reset.
Please refer to "VERSELAB MV-1: Factory Reset" for instructions on restoring the MV-1.
* Performing a factory reset will restore the system settings to their factory default state.