Using a Computer to Manage an Inserted SD Card
You can connect this unit to a computer via USB in storage mode to manage the contents of an SD card that you’ve inserted into this unit.
* Other operations are unavailable while in storage mode.
-
Make sure that a USB cable is not yet connected to this unit.
-
Hold down the [SHIFT] button and press the [SYSTEM] button.
- The UTILITY screen appears. -
Use the [VALUE] dial to select “STORAGE MODE,” and then press the [VALUE] dial.
- The message “PLEASE CONNECT USB CABLE” appears. -
Plug in the USB cable, and connect it to your computer. The unit enters storage mode.
- The SD card folder is shown on your computer. -
To return to normal operations, safely eject this unit from your computer, and then unplug the USB cable.
*** If connecting VerseLab MV-1 via USB ONLY ***
- With the power OFF connect the VerseLab MV-1 to you computer.
- Hold [SYSTEM] and power on the VerseLab MV-1 till screen displays "STORAGE MODE"
- To disconnect, Eject the MV-1 Drive from your computer, power off the VerseLab MV-1.